#Freepbx sip setup install
#Freepbx sip setup registration
#Freepbx sip setup password

#Freepbx sip setup password

> Use the IP address or hostname for your Asterisk box along with 1000 (the extension created earlier) and password for the 1000 extension to connect to your Asterisk box > Click on Submit ChangesВ to add your new inbound route to your Asterisk server > Choose First Extension (1000)В from the CoreВ dropdown box This is useful if you wish to receive all calls Make sure to leave the DID Number, Caller ID Number,В and Zaptel channelВ blank in order to match any incoming call. > If there isnвЂ™t a default inbound route called any DID / any CIDВ then click on Add Incoming Route. > Click on Inbound RoutesВ to configure the routing of calls to your IsraelNumber account If you have already configured an extension then you may substitute your pre-configured extension for point 4 below. In this section we are going to setup an inbound route that will handle incoming calls on ANY number, and route those calls to an extension (1000). > Click on Submit ChangesВ to add your new extension to your Asterisk server You will use this password when configuring your desired UA later in order to connect to your Asterisk PBX > Enter your desired password in the SecretВ field. Later you may enter a unique identifier of your choice Enter First ExtensionВ for the Display NameВ field. > For now we will use a generic identifier for this extension. > Click on ExtensionsВ to add a new extension which will connect to your Asterisk server Then in the next step (Inbound Route Configuration) you may use your pre-configured extension. If you have already configured an extension then you may skip this step. There are a few types of extensions, here we will create a SIP extension. > Click on Submit Changes to add your new route to your Asterisk serverДЄn extension is an account on your Asterisk PBX which provides an account number which another device (software or hardware) can connect to in order to make and receive calls. > Scroll to Trunk Sequence and select the SIP/IsraelNumber trunk from the drop-down list

> Enter to-IsraelNumber into Route Name field > Click on Outbound RoutesВ to configure your Asterisk box to send calls to IsraelNumber. If using FreePBX you will need to log in to your server and edit the /etc/asterisk/sip.conf file manually, usually with an editor such as Putty / Nano or such.ДЄn outbound route sends calls that are dialed in a certain pattern to your provider, IsraelNumber. > Now you will want to edit your sip.conf file and enter, or modify, the following lines: > Click on the red bar at the top of the screen to apply the changes you just made > Click on Submit ChangesВ to add your new SIP trunk to your Asterisk server Optionally you may change your password in your preferences.

#Freepbx sip setup registration

> Enter your registration string in this YourUserName and YourPassword were given to you by IsraelNumber at the time of registration. Optionally you may change YourPassword in your preferences. Where YourUserName and YourPassword were given to you by IsraelNumber at time of registration. > Copy and paste the following into the PEER DetailsВ field: > Scroll to Outgoing SettingsВ and enter IsraelNumberВ into Trunk NameВ field > Click Add SIP Trunk in middle of the page > Click on Trunks in the left side navigation > Click on Setup in the top right of the page > Login to FreePBX administrative interface In this section, we will configure a SIP trunk. In the context of this guide a trunk is used to route calls between your Asterisk PBX and your desired VSP(Voice Service Provider), in this case, IsraelNumber.

We recommend that you read each step through in its entirety before performing the action indicated in the step.

#Freepbx sip setup install

This guide also assumes that the FreePBX install steps were completed properly and that you have administrative access to the FreePBX administration interface. This guide assumes that you have installed FreePBX using either the FreePBX package or a method of your choice. The setup information below is based on FreePBX 2.1.3 although most other older and newer versions will look very similar.Д¬onfiguring the Asterisk PBX using the FreePBX interface Installing the account details given to you by us at sign up will allow you to send and receive calls using us as your provider. Using FreePBX you are able to do most of AsteriskвЂ™s configuration without editing the individual configuration files.